Hypoid gear tester GLEASON 512

GLEASON 512

SPECIFICATIONS

CAPACITY

Gear outside diameter (maximum) 508 mm

Pinion outside diameter (maximum) 254 mm

Offset of pinion spindle left or right of gear spindle center (maximum) 101.6 mm

PINION SPINDLE

Diameter of taper hole at large end 3-29/32"

Taper per foot ......................................................................................  39/64"

Depth of taper 3"

Diameter of hole at small end 3.740"

Depth of hole at small end from face of spindle 15.5"

GEAR SPINDLE                                               Standard    Large Bore

Diameter of taper hole at large end                   2-19/64"    3-29/32"

Taper per foot                                                 1/2"           39/64"      

Depth of taper                                                 3"              3"

Depth of hole at small end                                2.168"        3.740"

Depth of hole at small end from face of spindle  8"               7”

ELECTRICAL EQUIPMENT   60 Cycle                  50 Cycle

Main motor

Standard                     5 H.P., 1800RPM                1500RPM

Two-Speed                 5 H.P., 1800/900 RPM        1500/750RPM

Hydraulic motor           2 H.P., 1200 RPM               1000RPM

Pinion spindle speed

Standard                                1200 RPM

Two-speed                            1200/600 RPM

MISCELLANEOUS

Floor space                                           1650 x 2286 mm

Height                                                   1900 mm

Net weight (est.)                                    4989 kg

Shipping weight (boxed for export) (est.)  5778 kg

Size of case (est.)                                   2590 x 1960 x 2080 mm